RVK Fan – 10″ L (1080m3h)

Product Information

RVK fans are easily connected to other grow room ventilation equipment like carbon filters to remove odours or silencers to reduce noise. RVK fans can be wired in easily with a length of 3 core cable and standard 3 pin plug, to be installed directly into your grow room ventilation system. They’re speed controllable with triac or voltage.

Having the right atmospheric conditions is essential so that you can maximise results when growing with hydroponics. Yet this can be hard to manage manually, and that is why we offer an industry-leading range of high powered extraction fans and pro air fans. Having the right fan will ensure good air quality, as well as minimising odour and controlling temperature to sustain conditions. We offer the latest technologies so you can be sure to suit your growing projects.

How Systemair RVK’s Work:

Systemair RVK duct fans are high-quality intake/outlet fans for extracting old, stale air from your grow-space or for supplying it with fresh air. The fans are housed in a lightweight yet robust fibreglass and plastic casing with external ports for easy connection to ducting, filters, airsocks or other accessories. The fan can be powered directly from the mains or via a fan-speed controller (not included) to regulate the fan-speed and air-flow. Systemair RVK fans are very well-made and reasonably quiet during use. A bracket is included for ease of mounting.

Using Systemair RVK’s:

Systemair RVK fans can be used to draw air out of your grow-space via a carbon filter or just ducting. The fan can be mounted in the required location using the bracket provided. Many users prefer to use bungees to hang the fan from, which usefully reduce noise and vibration. The fan should be mounted so that the required air-flow direction matches the arrow mark on the casing. On the output side of the fan, slide your ducting over the outlet sleeve and secure it in place with a Duct Clip (not included). Repeat for the inlet side or a fast-clamp can be used to connect the fan directly on to a carbon filter. If a carbon filter is to be fitted it is important that the filter is rated at a similar air-flow as the fan. An electrical feed to the fan is required which can be directly from the mains or via a fan-speed controller. This should be performed by an electrically competent person. A downloadable wiring diagram can be found under the “Attachments” tab above this description. Be sure the diagram is followed closely.

Do not under any circumstances put your fingers into the spinning blades of a fan, especially an in-line type. Even a small fan has enough power to cause severe injury and loss of fingers. Just don’t do it, no matter how tempted you are. For RVK fans, follow the wiring diagram on the case moulding, do not match up the wire colours to the wires inside as they follow the European wiring code. Keep ducting runs as short as possible as every metre of ducting reduces the flow-rate that the fan can achieve. The more ducting attached, the lower the air-flow. Bear in mind that a carbon filter will reduce the air-flow that your fan can achieve by about 25% just on it’s own. When turning a corner with ducting try to create a swept bend rather than a sharp knee as this will reduce air-flow by the least amount and also help to keep wind-noise down. To further keep wind-noise down to a minimum, stretch flexi-ducting out as much as possible or use acoustic ducting.

Available Sizes: 

4-Inch RVK Fan

Rated air-flow: 184 m3/hour

Noise level: 34.5 dB

Power consumption: 29.1 Watts

Current draw: 0.171 Amps

Weight: 1.8 Kg

5-Inch RVK Fan

Rated air-flow: 220 m3/hour

Noise level: 37.5 dB

Power consumption: 29.2 Watts

Current draw: 0.172 Amps

Weight: 1.8Kg

5-Inch L RVK Fan

Rated air-flow: 323 m3/hour

Noise level: 43 dB

Power consumption: 58.8 Watts

Current draw: 0.257 Amps

Weight: 2.2 Kg

6-Inch RVK Fan

Rated air-flow: 428 m3/hour

Noise level: 40.6 dB

Power consumption: 59.6 Watts

Current draw: 0.262 Amps

Weight: 2.6 Kg

6-Inch L RVK Fan

Rated air-flow: 720 m3/hour

Noise level: 44.8 dB

Power consumption: 109 Watts

Current draw: 0.48 Amps

Weight: 3.1 Kg

8-Inch RVK Fan

Rated air-flow: 796 m3/hour

Noise level: 42 dB

Power consumption: 104 Watts

Current draw: 0.46 Amps

Weight: 3.2 Kg

8-Inch L RVK Fan

Rated air-flow: 1008 m3/hour

Noise level: 44.9 dB

Power consumption: 153 Watts

Current draw: 0.625 Amps

Weight: 3.8 Kg

10-Inch RVK Fan

Rated air-flow: 860 m3/hour

Noise level: 39.7 dB

Power consumption: 109 Watts

Current draw: 0.476 Amps

Weight: 3.7 Kg

10-Inch L RVK Fan

Rated air-flow: 1080 m3/hour

Noise level: 41.9 dB

Power consumption: 159 Watts

Current draw: 0.691 Amps

Weight: 3.8 Kg

12-Inch RVK Fan

Rated air-flow: 1360 m3/hour

Power consumption: 176 Watts

Current draw: 0.94 Amps

Weight: 5.8 Kg