CarboAir 60 Filter 250×660

 SKU: N/A  Categories: , ,
 EAN:
EAN:

£188.31£198.00

CarboAir 60 Filter 250×660

Clear
Loading...

Description

CarboAir 60 Filter 250×660

CarboAir Carbon Filters are also available in 50mm bed depths and 100mm bed depths

The 60mm CarboAir filters (Pro Grow Filters) set the bar for extraction, they are built to the exacting standards of Systemair – makers of the ever dependable RVK fans and industry leading Revolution fans. CarboAir utilises coarser, incredibly high quality carbon in thicker beds than competing carbon filters. This gives you optimal contact time to irradiate smells whilst also maintaining unbeatable airflow from your fan.

Airflow rates are a very important part of your grow room set-up and warrant serious consideration. If too much ‘drag’ is caused by the filter, your extraction system won’t work to its full potential: you’ll move less air through the grow space, temps will rise and CO2 levels won’t be replenished adequately, slowing down the process of photosynthesis and limiting plant growth. Maintaining a solid environment is easily the quickest route to successful growing.

  • Kills grow room smells stone dead without stifling your fans power
  • Hand built to an incredibly high standard – quality approved by Systemair
  • Pairs perfectly with Revolution fans
  • Machine washable pre-filter sleeve included and pre-fitted
  • Maintain high performance levels at the rated airflows for at least 18 months

Why do I need a carbon filter?
The extractor fan in your grow room removes hot, stale air and excess moisture from your grow room, which in turn draws fresh air in, controlling the environment and replacing CO2. If you’re growing plants that have strong, unwanted odours, you’re going to need to filter this air first before ducting it to an outside point. Your carbon filter attaches to your extractor fan – air gets sucked through an outer layer of mesh and through an internal layer of carbon before passing through your extraction system. It then leaves clean and free of any odours, keeping unwanted smells locked firmly inside the grow space.

CarboAir 50, 60 and 100? What’s the difference?
Like other carbon filters out there, CarboAirs are available in sizes that match 4 inch, 5 inch, 6 inch, 8 inch, 10 inch and 12 inch ducting. However, unlike other filter brands, CarboAirs are available with different depths of carbon.

CarboAir 50
CarboAir 50s come with shorter bodies that are perfectly matched to lower output fans, like RVK A1s, making them perfect for smaller spaces. These filters destroy smells without compromising air flow rates.

CarboAir 60
CarboAir 60s are ideal matches for fans with greater airflow ratings. Many plant strains can produce smells that are incredibly difficult to control – CarboAir 60s were engineered to provide an extra level of protection and deliver complete peace of mind to the grower. Perfect for medium sized grow spaces.

CarboAir 100
Strictly for the hardcore – these filters are designed to tackle extremely large volumes of air and extremely high odour levels, making them the perfect match for the most powerful fans on the market. Growers who operate on a large scale or want to double filter their air before it leaves the room will benefit the most from these super-thick filters. You’ll need high pressure levels in your fan to deal with a CarboAir 100, but what you’re getting is a filter that’s built to handle the most demanding environments possible with ease.

Max Airflow Rates for CarboAir 60:

  • 6″ 150mm/660mm CarboAir – 1350 m3/hr
  • 8″ 200mm/660mm CarboAir – 1700 m3/hr
  • 8″ 200mm/1000mm CarboAir – 2250 m3/hr
  • 10″ 250mm/660mm CarboAir – 2000 m3/hr
  • 10″ 250mm/1000mm CarboAir – 3100 m3/hr
  • 12″ 315mm/660mm CarboAir – 2450 m3/hr
  • 12″ 315mm/1000mm CarboAir – 3600 m3/hr
  • 12″ 315mm/1200mm CarboAir – 4250 m3/hr

Reviews

There are no reviews yet.

Be the first to review “CarboAir 60 Filter 250×660”

Your email address will not be published. Required fields are marked *